Ricoh MP C2504 Field Service Manual page 1841

4. Controller SP Mode Tables
• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the
error occurs.
• For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
• The first test print and subsequent test prints to adjust settings are added to the number of pages of
the copy job (SP 8072).
• When printing the first page of a job from within the document server screen, the page is counted.
8111 [T:FAX TX Jobs]
These SPs count the total number of jobs (color or black-and-white) sent by fax, either
directly or using a file stored on the document server, on a telephone line.
Note: Color fax sending is not available at this time.
001 B/W
002 Color
8113 [F:FAX TX Jobs]
These SPs count the total number of jobs (color or black-and-white) sent by fax directly on
a telephone line.
Note: Color fax sending is not available at this time.
001 B/W
002 Color
• These counters count jobs, not pages.
• This SP counts fax jobs sent over a telephone line with a fax application, including documents
stored on the document server.
• If the mode is changed during the job, the job will count with the mode set when the job started.
• If the same document is faxed to both a public fax line and an I-Fax at a destination where both
are available, then this counter increments, and the I-Fax counter (8 12x) also increments.
• The fax job is counted when the job is scanned for sending, not when the job is sent.
8121 [T:IFAX TX Jobs]
These SPs count the total number of jobs (color or black-and-white) sent, either directly or
using a file stored on the document server, as fax images using I-Fax.
Note: Color fax sending is not available at this time.
606
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]