Ricoh MP C2504 Field Service Manual page 1888

bit 6 Color balance switching
This BitSwitch can be used to restore the color balance to match that of
previous models. If this BitSwitch is set to "1" (Enabled), the color balance that
is equivalent to Fuji-Xerox printers will be used.
bit 7 [RPCS,PCL]: Printable area frame border
Prints all RPCS and PCL jobs with a border around the printable area.
1001 [Bit Switch]
1-001-002 Bit Switch 2
Color balance switching
This BitSwitch can be used to restore the color balance to match that of
bit 0
previous models. If this BitSwitch is set to "1" (Enabled), the color balance
from 09S and earlier models will be used.
bit 1 DFU
bit 2 Applying a Collate Type
A collate type (shift or normal) will be applied to all jobs that do not explicitly
define a collate type.
Note: If #5-0 is enabled, this BitSwitch has no effect.
bit 3 [PCL5e/c,PS]: PDL Auto Switching
Enables/Disables the MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL
switching is disabled, these jobs will not be printed properly.
Printer Service Menu
0:Disabled 1:Enabled
Disabled Enabled
0 1
Disabled Enabled
- -
Shift Collate Normal
Collate
Enabled Disabled
653