Ricoh MP C2504 Field Service Manual page 1906

1-013-002 -
1014 [Scan to Folder Pass Input Set]
1-014-001 0: OFF 1: ON
1041 [Scan:FlairAPI Setting]
1-041-001 0x00 – 0xff
Sets Scanner FlairAPI Function enable / disable.
This SP is set by BitSwitch and needs to reboot the machine after making changes.
bit Setting
bit 0 Start of FlairAPI Server
bit 1 Access permission of
FlairAPI from outside
of the machine
*CTL [0 or 1 / 1 / 1/step]
0: Disable
1: Enable
*CTL [0 or 1 / 0 / 1/step]
0: OFF
1: ON
*CTL * see BitSwitch below:
meanings
0 1
Off On
(Do not Start) (Start)
Disabled Enabled
Scanner Service Menu
Description
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled.
If it is "0", accessing is limited
from the machine only, such as
operating panel, SDK/J, MFP
browsers etc... If it is "1",
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc...
671