Ricoh MP C2504 Field Service Manual page 1900

1-001-012 Bit Switch C
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 DFU
bit 4 DFU
bit 5 Change the user ID type displayed on the
operation panel
As of 15S models, the Login User Name can be displayed on the operation
panel. The user ID type displayed on the operation panel can be changed by
configuring BitSwitch #12-5 as follows:
- 0 (default): Login User Name
- 1: User ID. If this is enabled, User ID will be displayed, which is equivalent
to the behavior exhibited in 14A and earlier models.
bit 6 Ability to use AirPrint
For 15S and later models that support AirPrint, AirPrint can be disabled by
changing this Bit Switch from 0 (default) to 1.
bit 7 DFU
1003 [Clear Setting]
1-003-001 Initialize System
Initializes settings in the "System" menu of the user mode.
1-003-003 Delete Program
1004 [Print Summary]
Prints the service summary sheet (a summary of all the controller settings).
1-004-001 Print Summary
*CTL [- / - / -]
[Execute]
*CTL [- / - / -]
[Execute]
*CTL [- / - / -]
[Execute]
Printer Service Menu
0 1
- -
- -
- -
- -
- -
Login User
User ID
Name
Enabled Disabled
- -
665