Ricoh MP C2504 Field Service Manual page 1704

6-123-048 Shift Tray Lower Limit Sensor 2
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-049 Shift Tray Lower Limit Sensor 3
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-050 Shift Tray Lower Limit Sensor 4
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-051 Shift Tray Lower Limit Sensor 5
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-052 Punch Chad Full Sensor
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-053 Punch Set Detection
Gets connection status of punch unit.
6-123-054 Shift Jogger Set Detection
Gets connection status of setting jogger unit.
* Not use: currently, VOLGA-B does not have setting jogger in system configuration.
6-123-055 Booklet Stapler Set Detection
Gets connection status of saddle stitch unit.
6-123-056 Front Door SW
Gets information of specified switch. Displays signal level of switch as it is.
6-123-057 Dynamic Roller Open/Close
Guide Plate Sensor
Gets information of specified switch. Displays signal level of switch as it is.
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
0: connected
1: not connected
ENG [0 or 1 / 0 / 1/step]
0: connected
1: not connected
ENG [0 or 1 / 0 / 1/step]
0: not connected
1: connected
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
Input and Output Check
469