Ricoh MP C2504 Field Service Manual page 1839

4. Controller SP Mode Tables
005 Z-Fold
Number of jobs started In any mode other than the Booklet mode and set for folding (Z-
fold).
006 Punch
Number of jobs started in Punch mode. When Punch is set for a print job, the P: counter
increments. (See SP8-064-6.)
007 Other
008 Inside-Flod
009 Three-In-Fold
010 Three-OUT-Fold
011 Four-Fold
012 KANNON-Fold
013 Perfect-Bind
014 Ring-Bind
015 3rd Vendor
8071 [T:Jobs/PGS]
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
8072 [C:Jobs/PGS]
These SPs count and calculate the number of copy jobs by size based on the number of
pages in the job.
8073 [F:Jobs/PGS]
These SPs count and calculate the number of fax jobs by size based on the number of
pages in the job.
8074 [P:Jobs/PGS]
These SPs count and calculate the number of print jobs by size based on the number of
pages in the job.
604
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]
*CTL [0 to 99999999 / 0 / 1/step]