Ricoh MP C2504 Field Service Manual page 1897

4. Controller SP Mode Tables
bit 5
bit 6
bit 7
1001 [Bit Switch]
1-001-010 Bit Switch A
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
662
Display UTF-8 text in the operation panel
Enabled (=0):
Text composed of UTF-8 characters can be displayed in the operation panel.
Disabled (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8
encoded characters. When these are displayed on the operation panel, they
will be garbled unless this BitSw is enabled (=0).
Disable super option
Switches super option disable on / off. It this is On, multiple jobs are grouped
at LPR port. PJL settings are enabled even jobs that are specified queue names
are sent.
Enable/Disable Print from USB/SD's
Preview function
Determines whether Print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
DFU
DFU
DFU
DFU
DFU
Store and Skip Errored Job locks the queue
If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ),
new jobs cannot be added to the queue until the stored job has been
completely printed.
Enabled Disabled
Enabled Disabled
Enabled Disabled
0 1
- -
- -
- -
- -
- -
Queue is not
Queue locked
locked after
after SSEJ
SSEJ