HPE D6020 Maintenance And Service Manual page 21

To remove a hard drive drawer component:
1. Extend the hard drive drawer (see
CAUTION: To avoid data loss, be sure that the drives are labeled and returned to the
same bays from which they were removed.
Figure 3 Releasing the hard drive drawer
2. As appropriate, remove the hard drive blank or hard drive.
Figure 4 Removing the hard drive blank
Figure 5 Removing a hard drive
To replace the hard drive or hard drive blank:
1. Locate the hard drive or hard drive blank.
NOTE: The hard drive to be used in the chassis must be a compatible hard drive. See
the D6020 QuickSpecs for more information.
"Extending the hard drive drawer" (page
Removing and replacing the hard drive and hard drive blank
19)).
21