Replacing The D6020 Hard Drive Drawer - HPE D6020 Maintenance And Service Manual

Figure 20 Releasing the hard drive drawer locking mechanisms
14. Remove the hard drive drawer.

Replacing the D6020 hard drive drawer

To replace the component:
1. Slide the rails back into the chassis.
Figure 21 Sliding the rails back into the chassis
2. Align the top right edge of the drawer with the flange at the top of the chassis, and align the
four rails on the left side and bottom of the drawer bay.
CAUTION:
perform this step.
30 Removal and replacement procedures
To avoid damage to the equipment, HPE recommends using two people to