B Specifications; Environmental Specifications; Storage Array Specifications - HPE D6020 Maintenance And Service Manual

B Specifications

Environmental specifications

Specification
Rated Line Voltage
Rated Input Frequency
Rated Input Current
Rated Input Power
Temperature range*
Operating
Storage
Relative humidity**
Operating
Storage
Altitude ‡
Operating
Non-operating
* Temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per
1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. The upper limit may be
limited by the type and number of options installed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Storage array specifications

Specification
Depth
Width
Height
Weight (no drives installed)
Weight (maximum)
Value
90 to 132 VAC 180 to 264 VAC
47 to 63 Hz
10A (at 100 VAC), 7.8A (at 200VAC)
@ 100VAC, 70 drives x 2TB-7.2K = 1043.7W
@ 100VAC, 70 drives x 600GB-15K = 1601.9W
10°C to 35°C (50°F to 95°F)
Maximum rate of change is 10º C/hr (50º F/hr)
-30°C to 60°C (-22°F to 140°F)
Maximum rate of change is 20º C/hr (68º F/hr)
10% to 90% relative humidity (Rh), 28º C (82.4º F)
maximum wet bulb temperature, non-condensing
5% to 95% relative humidity (Rh), 38.7º C (101.66º F)
maximum wet bulb temperature, non-condensing
3048 m (10,000 ft)
This value may be limited by the type and number of
options installed.
9144 m (30, 000 ft)
Value
89.12 cm (35.08 in)
44.70 cm (17.60 in)
22.10 cm (8.70 in)
72.58 kg (160.00 lb)
145.15 kg (320.00 lb)
Environmental specifications 53