HPE D6020 Maintenance And Service Manual page 31

Figure 22 Aligning the hard drive drawer in its bay
3. Push the drawer in about 25 cm (10 in).
4. Release the cable management arm and expand to the rear of the chassis.
Figure 23 Releasing and expanding the cable management arm
5. Push the drawer in another 25 cm (10 in).
6. Install the power block (see
WARNING! Pinch hazard—Keep hands out of front and rear of chassis when closing hard
drive drawers.
7. Install the hard drives.
Be sure that the drives are returned to the drive bays from which they were removed.
8. Close the drawer.
9. Install all rear panel components.
10. Connect the cables.
"Removing and replacing the D6020 power block" (page
Removing and replacing the D6020 hard drive drawer
25)").
31