Resetting The Password - Fujitsu FI-7600 Operator's Manual

Chapter 8 Operational Settings

Resetting the Password

In case you forgot your password, it can be reset in the
following procedure:
1
Right-click the Software Operation Panel icon in the
notification area, and select [Password Setting] from the
menu.
The [Password setting] window appears.
2
Enter the default password which is "fi-scanner", and click
the [OK] button.
The [Password setting] window appears.
3
Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
A confirmation message appears.
4
Click the [OK] button.
The password is set.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
163