Parts And Functions; How To Use The Operator Panel; Front; Operational - Fujitsu Fi-7030 Operator's Manual

Chapter 1 Scanner Overview

1.2 Parts and Functions

This section shows the names of the scanner parts.

Front

Side Guides
Positions the documents in place when the
documents are loaded in the ADF paper chute
(feeder) as they are fed into the scanner.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at a time
from the ADF paper chute (feeder).
Open this to replace consumables or to clean the
inside of the scanner.
Stacker
Stacks up the ejected documents.
Stacker Extension
Slide out to adjust to the document length.
Chute Extension 1
Pull out to adjust to the document length.
Chute Extension 2
Pull out to adjust to the document length.
ADF Paper Chute (Feeder)
Holds the documents to be scanned.
ADF Release Tab
Pull this tab to open the ADF.
Operator Panel
Consists of a Function Number Display,
buttons, and LED indicator.
Can be used to operate the scanner or check
the status.
For details, refer to "Chapter 3 How to Use
the Operator Panel" (page 45).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
15