Images Are Distorted Or Not Clear - Fujitsu FI-7600 Operator's Manual

Chapter 7 Troubleshooting

Images are distorted or not clear.

ADF:
Are the glass and rollers inside the ADF clean?
Flatbed [fi-7700/fi-7700S]:
Are the document pad and the document bed clean?
Yes
Is the ADF being pushed down during scanning? Or is
there a heavy object on top of the ADF?
No
Is a scan performed on a place that is unstable or
vibrates?
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner?
Yes
Are there any wrinkles or curls on the document?
No
Clean the dirty parts.
For details, refer to "Chapter 5 Daily Care" (page
No
Do not push down the top of the ADF, or place any heavy objects on the ADF
during scanning.
Yes
Perform a scan on a place that is stable and does not vibrate.
Yes
Either place the scanner on a flat and level surface, or attach the rubber pads on
the bottom of the scanner.
No
Smooth out the wrinkles or curls on the document.
Yes
If the problem persists, check the items in
Service Provider" (page 152)
an authorized FUJITSU scanner service provider.
102).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
141