Fujitsu FI-7600 Operator's Manual page 43

Chapter 2 How to Load Documents
4
Load the documents in the ADF paper chute (feeder) so
that the narrowest document can be picked by the pick
rollers.
Load the documents face-down in the ADF paper chute (feeder).
ATTENTION
 Remove all paper clips and staples.
 Reduce the number of sheets if a multifeed or pick error occurs.
Width of the Pick
Roller
ATTENTION
 Make sure that all documents are placed underneath the pick
roller. Otherwise, some documents may be skewed or not fed
into the ADF.
Width of the Pick
Roller
Width of the Pick
Roller
Good
Daily Care
Troubleshooting
Bad
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Replacing the
Consumables
Operational
Settings
Appendix
Glossary
43