Fujitsu FI-7600 Operator's Manual page 69

Chapter 3 How to Use the Operator Panel
■
Operational Settings
[fi-7600]
[fi-7700/fi-7700S]
1 [Power] Button
1
Press the [Power] button on the operator panel.
The [Ready] screen is displayed on the LCD.
2
Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3
Press the [ ] or [ ] button and select a setting item, then
 
press the [Scan/Enter] button to confirm.
For more details about the setting items, refer to
in the Settings Menu" (page 72).
The selected item is displayed on the LCD.
2 [Menu] Button
3 []/[] Button
[Scan/Enter] Button
4 []/[] Button
[Scan/Enter] Button
"Items Configurable
4
Press the [ ] or [ ] button and select a parameter, then
 
press the [Scan/Enter] button to confirm.
For more details about the setting parameters, refer to
Configurable in the Settings Menu" (page
HINT
 "*" is displayed for the factory default setting.
 When you select an item in the screen, the parameter currently
selected is highlighted.
If the [Settings Menu] screen is displayed on the LCD, it indicates
that the setup has been completed.
If the LCD displays a setting item, repeat step
[Settings Menu] screen.
Contents
"Items
Introduction
72).
Scanner
Overview
How to Load
Documents
How to Use the
4 until it shows the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
TOP
Index
69