Fujitsu FI-7600 Operator's Manual page 179

Chapter 8 Operational Settings
3
Adjust the level of offset/vertical magnification as needed.
Offset Setting
Unit Select [Flat bed] (fi-7700/fi-7700S), [ADF
(front)], or [ADF (back)] as the target for an
offset adjustment.
Main Adjusts the horizontal (width) offset.
The value can range from -2 to +3 mm (in
increments of 0.5).
Sub Adjusts the vertical (length) offset.
The value can range from -2 to +3 mm (in
increments of 0.5).
Vertical
magnification
Adjustment
Unit Select [Flat bed] (fi-7700/fi-7700S) or [ADF] as
the target for a vertical magnification
adjustment.
Description
Description
Vertical
magnification
Adjustment
Vertical Adjusts the vertical (length) magnification.
magnification The value can range from -3.1 to +3.1% (in
Adjustment increments of 0.1).
(Sub: length)
Description
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
179