Long Page Scanning; Various Ways To Scan - Fujitsu FI-7600 Operator's Manual

Chapter 4 Various Ways to Scan

Long Page Scanning

Documents with a length up to 5,588 mm (220 in.) can be
scanned by long page scanning.
If you scan a long page document and split the scanned
image into multiple pages, a document of up to 200 m (218.8
yd.) can be scanned.
Depending on the resolution setting or the image scanning
application, the document sizes that can be scanned may
differ.
For details, refer to the image scanning application manual.
1
Load a document in the ADF paper chute (feeder).
For details, refer to "Chapter 2 How to Load Documents" (page
ATTENTION
 Long page documents should be loaded one sheet at a time in
the ADF paper chute (feeder).
 When you scan long pages, take note of the following:
- Loading
Hold the document with your hand so it does not fall out of the
ADF paper chute (feeder).
ATTENTION
- Removing
Secure enough space around the stacker to prevent the
ejected sheet from falling off the stacker.
HINT
39).
To scan documents longer than A3 size, perform the following:
 Pull out the chute extension.
For details, refer to
(Feeder)" (page
 Pull out the stacker extension all the way.
For details, refer to
2
In the scanner driver, configure the scan settings to scan
the paper size of the long page.
For details, refer to the scanner driver's Help.
ATTENTION
If you scan a long page document and split the scanned image into
multiple pages at a lower resolution (less than 400 dpi), the
document is scanned slowly regardless of the resolution setting.
3
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
"1.7 Setting Up the ADF Paper Chute
29).
"1.8 Setting Up the Stacker" (page
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
30).
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
88