Installing the Rescue Disk Utility
Install the Rescue Disk Utility to the USB storage device. The procedure is given below.
Precautions for Correct Use
• We recommend that you start the Rescue Disk Creator from Run as administrator. Otherwise,
the Rescue Disk Creator cannot be installed correctly.
• Be aware that all data existing in the USB storage device to which you installed the Rescue
Disk Utility will be lost by installing the Rescue Disk Utility.
1
Connect the USB storage device to the USB port on the Industrial PC.
2
From the Windows start menu, select OMRON - Industrial PC, right-click Rescue Disk Crea-
tor, and select Run as administrator.
The Rescue Disk Creator dialog box is displayed.
3
Select a USB storage device under Target disk, and click the Create Rescue Disk button.
The Rescue Disk Utility is installed in the USB storage device.
4
Click the Close button to close the Rescue Disk Creator dialog box.
7-1-4
Backup with the Rescue Disk Utility
The backup procedure with the Rescue Disk Utility is given below.
1
Connect the USB storage device in which the Rescue Disk Utility is installed to the Industrial
PC while the power to the Industrial PC is not supplied.
2
Press the power button on the Industrial PC and then the F11 key.
The screen to select the device to start up is displayed.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
7 Backup and Recovery
7 - 3
7