Changing Windows File Sharing Setting; A-3-1 Procedure To Change; A-3-2 Cautions When Using Virtual Sd Memory Card - Omron NY532-1500 Setup And User's Manual

Appendices
A-3 Changing Windows File Sharing Set-
ting
In the factory setting, Windows file sharing is enabled only between Windows and Controllers. To
share files on external networks to the Industrial PC, change the setting of the network adapter to use.
A-3-1
Procedure to Change
In the properties dialog box of the external network to use, select the network adapter, and select the
File and Printer Sharing for Microsoft Networks check box.
A-3-2
Cautions When Using Virtual SD Memory Card
When file sharing on an external network is enabled, the shared folder which is used by the Controller
as a Virtual SD Memory Card is also published on the external network. The shared folder used as a
Virtual SD Memory Card is set to be shared with Everyone by default. Everyone means there is no
limit on access from external networks. To prevent unauthorized access to the Virtual SD Memory
Card from terminals on external networks, perform proper management of the settings and accounts
for terminals that are given access to the file.
For example, you can delete Everyone from the sharing settings for the shared folder used as a Virtu-
al SD Memory Card, and register only accounts created with Creating a User Account on page 3 - 3
for Controllers.
A - 4
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)