When you click the Cancel button on the Verification dialog box, the Industrial PC Support
Utility starts up with the operation authority set for the "Operation authority when a password
entry is omitted" on the Sysmac Studio.
Additional Information
To change to another operation authority, click the Disconnect button to disconnect from the
Controller once. When you reconnect, the Verification dialog box is displayed.
Operation Lock
If you don't operate the Industrial PC Support Utility for a certain period, you can keep it locked to dis-
able its operations. This function prevents users of different operation authorities from mistakenly per-
forming operations.
When the Industrial PC Support Utility is in the locked state, the Verification dialog box is displayed.
Enter the password to unlock.
You can enable operation locking and set the time to start locking from the Sysmac Studio. Refer to
the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for details.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
4 Industrial PC Support Utility
4
4 - 21