Operation Of The Operating System; Overview Of Operating System Operation; Data Exchange Between Operating Systems - Omron NY532-1500 Setup And User's Manual

1-2

Operation of the Operating System

This section describes how the operating systems of the Industrial PC operate and how the two oper-
ating systems relate to.
1-2-1

Overview of Operating System Operation

An Industrial PC has two operating systems: Windows and Real-Time OS. Separate processor cores
are allocated to each OS.
The Controller function is operated over Real-Time OS. Refer to the NY-series Industrial Panel PC /
Industrial Box PC Software User's Manual (Cat. No. W558) for details on the Controller function and
usage.
The Real-Time OS does not need any maintenance and settings.
Windows
CPU core 1
1-2-2

Data Exchange between Operating Systems

This section describes data exchange between Windows and the Real-Time OS.
There is a virtual network adapter for Windows. Each of Windows and the Real-Time OS (Controller
function) has an internal port. The two OSs exchange data through the internal port and the internal
network.
Accessing Windows from the Controller
You can use Windows shared folder as a Virtual SD Memory Card from the Controller, and backup
and restore the Controller data.
You can access the shared folder, as usual, from Windows.
Also, you can shut down or restart Windows by using instructions in the Controller programs.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Real-Time OS
CPU core 2 CPU core 3
Processor core
1 Introduction to the Industrial PC
Controller
CPU core 4
1
1 - 3