(e)
OK button
Cancel button
Apply button
2-4-2
Industrial Monitor Brightness Utility
The Industrial Monitor Brightness Utility simultaneously changes the brightness of multiple monitors
that are connected to the Industrial PC.
You can start up the Industrial Monitor Brightness Utility with the following screen or menu.
• Start menu
• System tray (Industrial PC Tray Utility)
Refer to A-5 Industrial PC Tray Utility on page A - 6 for details on the Industrial PC Tray Utility.
Application Procedures
As an example, the procedure to start up from the Start menu is given below.
1
Select OMRON - Industrial Monitor - Industrial Monitor Brightness Utility from the Start
menu.
The Industrial Monitor Brightness Utility is displayed.
(a)
(b)
2
Adjust with the slider.
The brightness of the screen of the Industrial Panel PC and all Industrial Monitors connected to
the Industrial PC are adjusted simultaneously.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Item
Applies the current Industrial Monitor Utility settings to
the Industrial Panel PC or Industrial Monitor and closes
the dialog box.
Closes the dialog box without applying the change.
Applies the current Industrial Monitor Utility settings to
the Industrial Panel PC or Industrial Monitor.
(a)
(b)
Slider
Industrial Monitor Utility button
Details
---
---
---
Item
Adjusts the brightness of the screen
backlights of the Industrial Panel PC and
Industrial Monitors.
Starts the Industrial Monitor Utility.
2 Initial Settings
Displayed information
Details
2 - 11
2