3 Controller Preparation
3-1
Internal Port Settings
This section describes the settings of the internal port through which the Controller communicates with
Windows.
Refer to 1-2-2 Data Exchange between Operating Systems on page 1 - 3.
Windows Settings
An internal port is set on Windows by default as a virtual network adapter port. The factory setting for
the internal port is given below.
Network adapter name
IP address
Subnet mask
Public range of Windows file shared service
Controller Setup
The factory setting for the internal port on the Controller is given below.
IP address
Subnet mask
3 - 2
Item
Item
192.168.254.1
255.255.255.0
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Value
Real-Time Hypervisor PCI Network Adapter
192.168.254.2
255.255.255.0
Internal network only
Value