Screen Of Industrial Pc Support Utility - Omron NY532-1500 Setup And User's Manual

4 Industrial PC Support Utility
Refer to 3-1 Internal Port Settings on page 3 - 2 for details on the IP address of the internal
port on the Controller.
Additional Information
If the operation authority verification is set for the Controller, from the Sysmac Studio, you
must enter the operation authority level and password to start up. Refer to 4-9 Operation Au-
thority Verification on page 4 - 20 for details.
4-2-2

Screen of Industrial PC Support Utility

When the Industrial PC Support Utility is started up, the following screen is displayed.
(f)
Item
(a) Language selection
(b) Display area
Product Information
System Status
Controller Status
Controller Operation
Network Setting
Virtual SD Memory
Card Setting
(c) Close
(d) Disconnect
(e) Connect
(f) Update Screen
4 - 4
(d)
(e) (c)
Description
Select a language to display the Industrial PC Support Utility from
Japanese and English.
---
Displays the model number, lot number, hardware version, and
software version of the Industrial PC.
Displays the internal temperature of the Industrial PC, fan revolu-
tion, and battery and UPS status.
Displays the Controller status such as operating mode and current
errors.
Perform operations such as operating mode change, backup and
restore for the Controller.
Change the network settings such as EtherNet/IP port and internal
port settings.
Change the Virtual SD Memory Card settings.
Closes the Industrial PC Support Utility.
Disconnects from the Controller.
Connect to the Controller again. The Network Connection dialog
box is displayed.
Gets information from the Industrial PC, and updates the contents
to be displayed.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
(a)
(b)
Reference
---
---
4-3 Displaying Production In-
formation on page 4 - 5
4-4 System Monitor on page
4 - 6
4-5 Controller Monitor on
page 4 - 7
4-6 Controller Operation on
page 4 - 9
4-7 Network Settings for Con-
troller on page 4 - 16
4-8 Virtual SD Memory Card
Settings on page 4 - 18
---
---
---
---