6-4
Industrial PC Controller API
This section describes the types of members of the Industrial PC Controller API and how to use them.
The Industrial PC Controller API is constructed with the following classes.
• IPCController class
• ControllerAccessException class
• ControllerInternalExecuteException class
Refer to the help for the Industrial PC API for the usage of each member of the Industrial PC Control-
ler API.
6-4-1
IPCController Class
The IPCController class provides the function to access the Controller.
The members for the IPCController class are given below.
Properties
Name
ApiVersion
RuntimeVersion
RunMode
ErrorStatus
CanResetController
UnitName
UserErrorStatus
OperationLockTimer
IsEnabledOperationAuthority
OperationAuthorityWithoutPassword
IsConnectionStarted
PhysicalAddress
LedStatus
Methods
Name
GetInstance
ResetController
GetIPAddress
GetDefaultGatewayAddress
SetIPAddress
SetDefaultGatewayAddress
Connect
Disconnect
VerifyPassword
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Version of the API interface
Version of the Controller Runtime
Operating mode of the Controller
Controller error status
Value that indicates whether the Controller can be reset
Unit name of the Controller
User-defined error
Time until operation lock
Indicates whether the verification is enabled.
Default operation authority when the password entry is omitted
Indicates whether connection to the Controller is established.
The MAC address of the built-in EtherNet/IP port
The status of the built-in EtherNet/IP network
Gets the only instance of IPCController.
Resets the Controller.
Gets the IP address and subnet mask of the port specified by an argument.
Gets the default gateway address.
Changes the IP address and subnet mask of the port specified by an argument.
Changes the default gateway address.
Connects to the port of the specified IP address.
Execute disconnection.
Verify the password for the specified authority.
6 Industrial PC API
Meaning
Meaning
6
6 - 5