Intended Audience; Applicable Products; Ny512 - Omron NY532-1500 Setup And User's Manual

Introduction
Thank you for purchasing an NY-series IPC Machine Controller Industrial Panel PC / Industrial Box
PC.
This manual provides a collective term of Industrial Panel PC and Industrial Box PC which are applica-
ble products as the NY-series Industrial PC. This manual also provides the range of devices that are
directly controlled by the Machine Automation Control Software embedded in the NY-series Industrial
PC as the Controller.
This manual contains information that is necessary to use the NY-series Controller. Please read this
manual and make sure you understand the functionality and performance of the NY-series Controller
before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.
• NY-series IPC Machine Controller Industrial Panel PC
• NY532-15££
• NY532-14££
• NY532-13££
• NY-series IPC Machine Controller Industrial Box PC
• NY512-15££
• NY512-14££
• NY512-13££
Part of the specifications and restrictions for the Industrial PC are given in other manuals.
Refer to Relevant Manuals on page 2 and Related Manuals on page 19.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Introduction
1