Controller Monitor - Omron NY532-1500 Setup And User's Manual

4-5

Controller Monitor

The Industrial PC Support Utility displays the Controller status such as operating mode and current
errors.
To display the information, click the Controller Status tab.
Item
Controller unit name
Controller operation Mode
Controller Error
User-defined Error
Built-in EtherNet/IP port
IP address
Subnet mask
MAC address
NET RUN
NET ERR
LINK
Internal Port
IP address
Subnet mask
Default Gateway
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Description
Displays the unit name that is set for the Controller.
Displays the present operating mode of the Controller.
Displays current Controller errors.
Displays current user-defined errors.
Displays the settings of the built-in EtherNet/IP port through
which the Controller communicates with an external device of
the Industrial PC.
Displays the present IP address, subnet mask, and MAC ad-
dress.
Displays the CIP connection status of the EtherNet/IP network.
Displays the communications error status of the EtherNet/IP
network.
Displays the link establishment status of the EtherNet/IP net-
work.
Displays the settings of the internal port through which the
Controller communicates with Windows on the Industrial PC.
Displays the present IP address and subnet mask.
Displays the present default gateway.
4 Industrial PC Support Utility
Displayed information
Controller name
PROGRAM Mode
or RUN Mode
No Controller error, Partial or
minor fault level Controller error
occurs, or
Major fault level Controller error
occurs
No user-defined error, or User-
defined error occurs
---
IP address
Subnet mask
MAC address
Running/Connecting/Stop
Critical Error/Error/No Error
Up/Down
---
IP address
Subnet mask
IP address
4
4 - 7