Intended Audience; Applicable Products And Replacements - Omron NY Series Manual

Introduction
You want to convert your NS-series Programmable Terminal to an NYE-series Industrial Panel PC.
This manual is relevant for the conversion from an NS-series product to an NYE-series product. After
the conversion this manual can be discarded because all required information is available in the Hard-
ware and Software manuals of the Industrial Panel PC.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing Factory Automation systems.
• Personnel in charge of designing Factory Automation systems.
• Personnel in charge of installing and maintaining Factory Automation systems.
• Personnel in charge of managing Factory Automation systems and facilities.

Applicable Products and Replacements

This manual covers the conversion from NS-series Programmable Terminal products to NYE-series
Industrial Panel PC products.
Discontinued Product
NS15-££££-V2
NS15-££££B-V2
NS12-££££-V2
NS12-££££B-V2
NS10-££££-V2
NS10-££££B-V2
NS8-££££-V2
NS8-££££B-V2
NS5-££££-V2
NS5-££££B-V2
Additional Information
Refer to 1-2 Product Configuration on page 1-3 for configuration details.
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
Recommended Replacement Model
NYE2A-20S11-15WR1300
NYE2A-20S11-15WR1200
NYE2A-20S11-12WR1300
NYE2A-20S11-12WR1200
NYE2A-20S11-12WR1300
NYE2A-20S11-12WR1200
NYE2A-20S11-09WR1300
NYE2A-20S11-09WR1200
NYE2A-20S11-07WR1300
NYE2A-20S11-07WR1200
Introduction
1