Introduction; Intended Audience; Applicable Products - Omron NY532-5400 Instruction & Reference Manual

Introduction

Thank you for purchasing an NJ/NY-series NC Integrated Controller. ("NJ/NY-series NC Integrated
Controller" is sometimes abbreviated as "NC Integrated Controller".)
This manual contains information that is necessary to use the NC Integrated Controller. Please read
this manual and make sure you understand the functionality and performance of the NC Integrated
Controller before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
This manual only describes functions that are added to NJ501-5300 or NY532-5400.
When you use NJ501-5300, also consult manuals for the NJ-series listed in Related Manuals on page
21 for functions common to NJ501- Series including NJ501-1.
When you use NY532-5400, also consult manuals for the NY-series listed in Related Manuals on page
21 for functions common to NY532- Series including NY532-1.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or person with equivalent skills).
- Personnel in charge of introducing FA systems
- Personnel in charge of designing FA systems
- Personnel in charge of installing and maintaining FA systems
- Personnel in charge of managing FA systems and facilities
This manual is also intended for personnel who understand the following contents.
• For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS 3503.
• For NC programming, this manual is intended for personnel who understand the programming lan-
guage specifications in international standard ISO 6983-1 or Japanese standard JIS 6315.

Applicable Products

This manual covers the following products.
• NJ-series NC Integrated Controller
NJ501-5300
• NY-series NC Integrated Controller
NY532-5400
NJ/NY-series G code Instructions Reference Manual (O031)
Introduction
1