Technogym Recline 500SP Service Maintenance Manual page 92

Replace the receiv er
Follo w the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
(1 ) Check the earthing of the machine using a tester to measure the resistance between the ground
pin on the power supply cable and the ground node to which the receiver is connected inside
the display. The value must be less tha
(2) In the table below , the minimum distances at which machines should be installed to avoid
crosstalk problems.
R
E
C
2
machine 2
Bike Recline Run
30 50
machine 2
Bike Recline Run
140 210
Page 6.32
Is the transmitter in good
YES
Is the transmitter alway s within
the 80 cm range f rom the receiv er
R
2
E
C
DISTANCE CASING-CASING
machine 2
Bike Recline Run
20 40 60
DISTANCE RECEIVER-RECEIVER
machine 2
Bike Recline Run
205 90 110
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
A
5
NO
working order?
YES
NO
n 1 Ohm.
REC
machine 2
Bike Recline Run
50 0 0
machine 2
Bike Recline Run
115 50 80
Use a correctly
f unctioning transmitter
Reposition the transmitter
within range
REC
2 2
machine 2
Bike Recline Run
10 60 80
machine 2
Bike Recline Run
130 230 280
40
285