Technogym Recline 500SP Service Maintenance Manual page 130

Figure 7.18-5
Page 7.36
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
6. Extract the cable up to find the patch
connector as shown in the figure.
7. Unplug the connectors d of the touch sensor
cables and the connector e of the hand
sensor cable.
8. Remove the saddle.
To reassemble the saddle, carry out the above
steps in reverse order.
After completing this operation, adjust
the saddle position as described in
paragraph 8.5. "Saddle sliding".