Table of Contents
Advertisement
(3)
Place the tester probes across pins 2 and 1 of connector J3 on the HS inter
measured value should be +5 Vdc.
(4
)
As for step (2) but across pins 1 and 6 of connector CN4 on the display board.
(5)
Check the connection between the FLEX CABLE, CBQ-25-1-R1 and CBQ-26-R2 cables.
Replace the cable if damaged.
Page 6.30
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
face board. The
- Quick Links:
- 700I and 700I Sp Models
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
