Technogym Recline 500SP Service Maintenance Manual page 48

When programming the machine sometimes it is necessary to fit plug into the free RJ-45
port on the back of the display, to avoid any type of interference during the operation.
The wiring diagram of the RJ-45 plug is as follows:
Programming cable and plug can be ordered using the code H0002534AA.
4.3. CABLE FOR EXCHANGING TV CHANNEL TUNING
DATA BET EEN
The link for transferring the TV channel tuning data from one machine to the other is effected via a
special cable, wh ich plug
The cable to use (code 0W
CSafe Board;
RJ45
3
4
7
8
ATTENTION: for the numbering of the pins, on RJ45 connector, please refer to the
diagram below:
Page 4.2
W TWO MACHINES
s into the RJ45 connectors of the CSafe
C00644AA) m ust be wired as follows:
Signal
Tx
Rx
Digital Ground
Ground Shield
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
boards.
Cable
Color
White
Brown
Green
Yellow
CSafe Board;
RJ45
4
3
7
8