Technogym Recline 500SP Service Maintenance Manual page 72

(3) Using a tester, check that all the output volt
correct, referring to paragraph 2.9. "Cables".
(4 ) As for step (3) but on connector CN16 on the connector board.
(5 ) As for step (3) but on connector CN5 on the CPU board.
(6 ) As for step (3) but on connector CN1 on the LCD inverter board.
(7) Place the tester probes across the 2 pins of the connector CN2 an
board. The measured voltage should be approximately 380 VAC.
Page 6.12
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
ages on connector CN1 of the brake board are
d CN3 of the LCD inverter