Technogym Recline 500SP Service Maintenance Manual page 106

7.2.3. 500
I AND
Figure 7.2-23
Figure 7.2-24
Figure 7.2-25
Page 7.12
500 SP
I VERSIONS
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Carry out the procedure described in paragraph
7.1. "Disassembling the display".
Th n place the displa e
now possible to disassemb
• The 386 b
oard a;
•
The display board b;
• The CSafe board c.
386 board a:
1. Release the fixing tabs. The circuit board
will lift up slightly.
2. Remove it from the connector on the display
board.
Display board b:
1 . Unplug the keyboard connector indicated in
the figure.
2. Back off the 4 screws d using a me
Phillips screwdriver.
3. Remove the circuit board.
CSafe board c:
1. Unplug the connector indicated in the figure.
2. Remove the circuit board from the top.
To reassemble the electronics boards, carry out
the above steps in reverse order.
y on a work bench. It is
le its circuit boards:
dium