Technogym Recline 500SP Service Maintenance Manual page 56

Figure 4.5-11
Figure 4.5-12
Figure 4.5-13
Figure 4.5-14
Page 4.10
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
34. Remove cover plate h, backing off the 4
screws i using a Phillips screwdriver.
35. Insert external connector board 2 along the
special guides on cover plate 1, in
way that the connectors on the board match
up with the holes on the cover plate.
36. Secure exter l na connector board 2 with
screws and washers 4 and 5, using a Phillips
scr ewdriver.
37. Connect cable 9 (CB-9) to connector board
2.
38. Assemble cover plate 1 inside the rear
display housing, using the 4 screws 3 and a
Phillips screwdriver.
39. Remove the covering from the LED display,
backing off the 3 screws l using a Phillips
screwdriver.
40. Unplug the TGS cable, if present.
Continued on following page →
such a