Technogym Recline 500SP Service Maintenance Manual page 132

Figure 7.19-4
Figure 7.19-5
Figure 7.19-6
Page 7.38
RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
7. Back off the two screws f using a 17-mm
wrench.
8. Overturn the selector plate g.
9. Back off the two screws h using a 2.5-mm
Allen wrench.
10. Unplug the connector i from the board.
11. Release the 3 clips l and remove the board
from the box.
12. Unplug the connector m from the board.
To reassemble the hand sensor board, carry out
the above steps in reverse order.