Technogym Recline 500SP Service Maintenance Manual page 111

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Figure 7.4-4
Figure 7.4-5
Figure 7.4-6
To assemble the new receiver:
1. On the HFU receiver, there are the receiving
coil f and the connector g.
2. Connect the cable to the cardio receiver and
bend the cable on a side of the connector.
3. Place the receiver in the sponge h as shown
in the picture to side.
4. Use a cable tie to secure the receiver in the
sponge.
the receiving coil must be oriented
upwards and toward the user.
Continued on following page →
Page 7.17