Main Frame - Epson PX-8 Technical Manual

r-
4.1 Main Frame
(1) Unit Disassembly and Assembly
Lower
case
(see
Fig.
4-1.)
Disassemble Procedure
Step 1. Turn the body upsidedown with the
handle to your side.
Step 2. Remove the screw of the battery
cover and remove the cover.
Step 3. Pull out the connector of the battery
and remove the battery.
Step 4. Remove seven screws pointed by
arrows.
Step 5. Lift up the lower cover from the
right side.
...
SW
panel&~
button
...
I
REV.-A
Assemble Procedure
Step 1. Same as step 1 of the disassemble
procedure.
Step 2. Remove switch panel and button of
power switch.
Step 3. Fit handle to lower case.
Step 4. Fit lower case from speaker volume
knob side (left side).
Step 5. Fit seven screws pointed by arrows.
Step 6. Fit switch panel and power switch
button.
Step 7. Fit battery and battery cover with
screws.
•
Battery cover
!
•
.
..
' " •
Fig. 4-1
4-2