Epson PX-8 Technical Manual page 252

REV.-A
How to adjust the HP switch
I
Before mounted
I
1. Nominal separation: approximately
twice the
fixed spring
plate thick-
ness -0.35
± 0.1 (Unit: mm)
Movable spring plate
Must be rectangular.
How to adjust the PE switch
(1) Mounting position
Fixed spring plate
0.15
0.1
(Unit: mm)
L
Sep"atm
The separator must rest on the base plate.
Cam
I
After mounted
I
The fixed spring plate must
rest on the cam face.
The separator must rest on
the protrusion face.
When the separator is inclined, rest it flat on the base plate.
If the contact plate is bent, stretch it straight.
5-51