Roland GR-540 User Manual page 87

Printer Requirements
You must use a laser or inkjet printer with a resolution of 720 dpi or greater.
If the printed filled sections are blurred, crop marks will not be read correctly.
CutStudio
Be sure to install this program. Only CutStudio can be used to perform printing and cutting operations.
http://startup.rolanddg.com/
Materials That Can Be Used for Printing and Cutting
This example uses A4-size material.
Materials That Can Be Used for Printing and Cutting
Sample Data
Open the Sample.bmp file found in the CutStudio installation folder (usually located in the CutStudio folder
under Program Files on the C drive).
Sample Data Cannot Be Found
Printing and Cutting Procedure (CutStudio)