Table of Contents
Advertisement
Step 5: Perform Cutting
(Manual Mode)
CAUTION
Referring to the
Procedure
Press the [ ] key, and then press the [ ] key to select 4-POINT START.
If using 3 crop marks, select 3-POINT START. The screen shown in the following figure is displayed.
Press [ENTER].
The screen shown in the following figure is displayed.
Never touch the cutting carriage while output is in progress.
The cutting carriage moves at high speed. Coming into contact with the moving
carriage may cause injury.
Menu Flow Chart
as you proceed will help the setting procedure go smoothly.
Hide quick links:
Advertisement
Table of Contents
