Roland GR-540 User Manual page 21

Number Name
16 PINCH key
17 Display
18 Cursor keys
19 CUT CONFIG key
20 ORIGIN key
21 PAUSE key
22 SHEET CUT key
23 PEN FORCE slider
24 MENU key
25 MEMORY key
26 ENTER key
Carriage LED Lamp
Use this to raise and lower the pinch rollers. Use this when
inserting or removing the material.
When the pinch rollers are lowered, this key lights.
This displays various setting menus and other information.
You use these to select settings for menu items, to move the
material, and for other such operations.
Use this to set cutting conditions such as the blade force and the
cutting speed.
Perform a cutting test to check the conditions you have set.
Use this to set the origin to the current blade position.
Hold down this key for one second or longer.
This pauses printing operation. Press it again to restart operation.
This lights when operation is paused.
Use this to cut the material from the roll. Hold down this key for
one second or longer.
Use this to fine-tune the blade force. You can even perform this
adjustment while cutting is in progress.
The message on the display changes each time that you press this
key. The display switches in the following order: currently set
cutting conditions → menu mode → width display screen.
Use this key to apply recorded cutting conditions to the settings
of the machine and to record the current setting values to the
machine.
You use this for such tasks as enabling setting values.
Description
Notation used in this
document
[PINCH]
- - -
［ ］ ［ ］
［ ］ ［ ］
[CUT CONFIG]
[ORIGIN]
[PAUSE]
[SHEET CUT]
- - -
[MENU]
[MEMORY]
[ENTER]