Roland GR-540 User Manual page 18

minus approximately 1 mm on each side.
Type of specified material
[ROLL] or [EDGE]
[PIECE]
*: If the detected length is 1,600 mm or more, the machine determines the material to be [ROLL], and the
length of the cutting area is set to 24,998 mm.
However, the display does not show the length.
Using Various Types of Materials
<Width>: Distance between the two pinch rollers minus approximately 1 mm
on each side
<Length>: 24,998 mm
<Width>: Distance between the two pinch rollers minus approximately 1 mm
on each side
<Length>: Detected length(*)
*: For the range for assured accuracy, refer to the
specifications.
: Cutting area
: Pinch roller
Cutting area