Roland GR-540 User Manual page 17

* Conditions differ according to the type of blade.
Refer to "General Guide Regarding Cutting
Cuttable Area
Model name
GR-640
GR-540
GR-420
* The maximum width can be extended by up to 20 mm depending on settings. However, this may cause the
pinch roller to leave marks on the products. Exercise caution. For instructions on how to extend the cutting
area, refer to "Extending the Cutting Area
Explanation of Cutting Area
The cutting area along the material's horizontal plane (the direction in which the cutting carriage moves) is
determined by the position of the pinch rollers. The cutting area spans the length between the two rollers,
Conditions."
Maximum cutting area
Width: 1,651 mm (65 inches)(*)
Length: 24,998 mm
Width: 1,397 mm (55 inches)(*)
Length: 24,998 mm
Width: 1,075 mm (42.3 inches)(*)
Length: 24,998 mm
<EXTEND>."