Roland GR-540 User Manual page 20

6 Power switch
7 Ruler
8 Grit pattern
9 Blade protector
10 Grit rollers
11 Platen
Back
Number
12 USB connector
13 Ethernet connector
14 Power-cord connector
15 Material basket
Operation Panel
Use this to set and operate the machine.
Turns the machine's power on and off.
Set the material in place so that its right edge is aligned with the front
and back rulers.
These indicate the locations of the grit rollers. When loading the
material, be sure to place the pinch rollers within the area indicated by
each of these patterns.
This protects the tip of the blade during cutting.
These rollers feed the material to the front and rear.
This is the path over which the material passes. A suction fan that
keeps the material from coming loose is built in.
Name
This is for connecting a USB cable.
This is for connecting an Ethernet cable.
This is for connecting a power cord.
This receives and stores the material that is cut from the roll.
Description