Roland GR-540 User Manual page 206

Step 4: Cut Perforated Lines
CAUTION
Procedure
Click
The screen shown in the following figure is displayed. Select the type of cutting lines you want to use
from the list.
[All]: The cutting lines and the perforated cutting lines will be output.
[Cut Lines Only]: Only the cutting lines will be output.
[Perforated Cut Lines Only]: Only the perforated cutting lines will be output.
Checking the Installed Position of the Cutting Tool Each Time before Cutting
Never touch the cutting carriage while output is in progress.
The cutting carriage moves at high speed. Coming into contact with the moving
carriage may cause injury.
.