Roland GR-540 User Manual page 304

Using Narrow Material/
Preventing Marking Made by the Middle Pinch
Rollers
When using narrow material and when using material that is easily marked by the pinch rollers, use just the
pinch rollers on the ends to feed the material. In this mode, the middle pinch rollers are not used (they are
disabled).
Reducing the Force of the Middle Pinch Rollers
Procedure
Make sure the material is loaded in the machine.
Press [MENU] several times to display the screen shown in the figure.
Press [ ] several times to display the screen shown in the figure.
Press [ ].
Press [ ] to display the screen shown in the figure.