Step 2: Create Perforated Line Data
* The screenshots show an example of Illustrator CC 2015, but the operation procedure is the same for other
versions.
* You must install Plug-in for Illustrator before proceeding.
Installing Plug-in for Illustrator
Procedure
Start Illustrator.
Open a new document, and then set the artboard.
Set the document size to be the same as the cutting width displayed on the machine.
Set a length that is longer than the product that you want to create.
Create a new design or open an existing file.
In this example, you will create the design shown in the figure below.